CaliPoolOwner's latest activity
-
CGet pool math. Link--> Configure your pool. Use the "Effects of Adding Function" Choose SWG, and select the IC-40 for your cell. Play...
-
CC, The basic idea is that for the first week or two, you test the FC in your pool water every couple of days.. You can then get a feel...
-
CCaliPoolOwner replied to the thread Need Help with Pentair IC40 SWG.My pool servicer has been managing this install. He was adding 1-2 big bags of salt to get the water prepped for the SWG installed...
-
CYou can definitely run the pump continuously. Many believe that extends the life of the pump as start up is the hardest time on the pump...
-
CC, Your cell, when run 24 hours at 100% output will add about 11 ppm of FC (Chlorine) to your pool.. That is basically .45 ppm per...
-
CCaliPoolOwner replied to the thread Need Help with Pentair IC40 SWG.Thank you Jim, I am learning as I go and I really appreciate your input. I will go with 24/7/365 for now. From your math, I should be...
-
CYou must set your pump to run 24/7, then adjust your SWCG output to create the desired amount of chlorine. Since you do not have...
-
CCaliPoolOwner replied to the thread Need Help with Pentair IC40 SWG.I believe the style of check valve that I have has screws to remove the sight glass and flip the check side orientation. Could I simply...
-
CCaliPoolOwner replied to the thread Need Help with Pentair IC40 SWG.Hi mknauss, thanks for providing a quick reply. Another use (Jimrahbe) suggested that I could run my pump 24/7/365 until I get some...
-
CNot directly. You will need to install a timer or a current sensing device. Sadly you should have installed an Intelliflo3 VS pump with...
-
CC, You do not need the check between the heater and the IC40, but it will not hurt anything.. You might have to run the pump slightly...
-
CCaliPoolOwner replied to the thread Need Help with Pentair IC40 SWG.Hi Jim, Thank you for the valuable information. I am very glad to have found this information and posted my concerns before I created a...
-
CCaliPoolOwner replied to the thread Need Help with Pentair IC40 SWG.Sorry to revive this thread, I have started a thread of my own as well to get more input. I am encountering the same issue with my IC40...
-
CCaliPoolOwner replied to the thread Need Help with Pentair IC40 SWG.Just wanted to add some relevant pool/equipment information below. I don't have the measurements for the water testing on hand. I will...
-
CCaliPoolOwner replied to the thread Need Help with Pentair IC40 SWG.It is a little hard to see in the photo, but the pool heater output (bottom pipe) goes out and towards the wall before turning up and...
