Recent content by Blooze

Well, we disclosed the bulge and had to drop the price $6k, half the cost of the estimate for repair. Everything else checked out ok (pressure test, equipment working).

We finally found someone out of Dallas who can repair it. They will cut out the bulge then reinforce it from the underside before laying a new piece to patch and recoating the entire pool. Work and patch warranted for 5 years and 10 years on materials as well as transferable to the new owner...

Just pics of the pool itself. You can’t see the bulge from the deck. You can sure feel it when your in the pool though. https://www.rollinghillsimagery.com/Other/Sharing/n-fVw8D/i-Nw674Kr

No one knows if this is fixable? We are near Ardmore, Ok. So far I haven’t found anyone that repairs fiberglass pools other than cracks from OKC to Dallas. We’ve been told by lenders that they will not lend money to a buyer unless the pool is fixed and we are desperate to get the house on the...

We are into our third year at our current home with a 15K gallon kidney shaped fiberglass pool that was put in 10+ years ago. We opened it last month and noticed last week that we have a bulge about 1" tall, about 18" wide tapering down from the high spot, and about 8-10' long coming from just...

The display PCB is brand new. I removed it and cleaned the pins gently with an eraser ( which works great for all the electronics I've built over the years). Of course it fired up and appeared to run like it should. We shall see as the rest of the week goes by. I do hate trying to line the front...

We've had this happen several times now and up until today it's only happened when the booster pump was running. We get the PCB error and the no flow, check salt, high salt, and inspect cell light are all on as is the power LED. Turn power off for a minute or two and it may run fine for the next...

Thanks. I checked when I got home and the pump is a Hayward SP4020. Says 2.0 HP; 1.35 SF, 2.70 THP. Figure pool is around 15000 gallons at 3' deep at shallow end and 5'deep at other end. About 35' x 15' bean shaped. Also noticed the flow switch quit working today. We have an Aquarite swg...

We have just bought a home with our first pool (inground) and it came with a Polaris 280. The booster pump is wired in with the main pump so it won't run unless the main is on. The question we have is with the Polaris attached to the pressure outlet on the side of the pool and the booster pump...