Recent content by bizeesheri

I used a plastic bag with a rubberband to put around the inside connector, worked well also.

Couple of ideas What Can You Make With a Pool Noodle: Part 2 | Pool Noodles, Noodles and Pools tubing | Happy Hour | Pinterest | Ropes, Noodles and Ties

Since I only have the 12x30 pool, an in wall skimmer is not viable for me. I do have the over the wall skimmer, which comes with the blue plate. What I made work was go get a pool hose connector from Ace, like this: Ace Pool Hose Connector 9 in L x 1 1 4 in W | eBay Disconnect the clear...

I have upgraded my hoses to the 1.5 inch with the inlet and return pieces from Amazon. I cannot disconnect the pieces from the inside of the pool, when I vacuum, I disconnect the hose from the inlet and use a white reducer item I got from Ace Hardware to connect the vacuum hose. I assume with...

I think for me, in the same situation as you, will try to set this up as you mentioned below. I can then use one for the strainer and the other for debris floating, but not quite to the top for the other outlet. Maybe one day I'll try using the inlet as the outlet (using the strainer), and...

I'm in the same boat as you, for now I used the plug and one outlet serves no purpose. I read on here someone used the inlet for the outlet (switched it around) and had two inlets. I like that idea as I bought a skimmer anyways. Figuring the two inlets would stir up the water more. I bought...

I'm researching an AGP. Local Doughboy dealer has a 12x24 oval Intrigue model. Someone ordered, then couldn't get it. It seems from the doughboy site that this is an older model? Was it a top of the line one? What are the top of the line models currently. Or what compares to the...