Recent content by AndyTN

  1. AndyTN

    Power Outage - Anything else I should be doing?

    Agreed. Some good cannon balls will work really well to keep it mixed up.
  2. AndyTN

    Power Outage - Anything else I should be doing?

    Since you don't have a SWG, the only thing you won't be able to do is filter. You can always use your brush like a spoon in a stock pot to manually mix up the water after you add FC. I would do a bit more than just splash water around and you can make circles around your pool with the brush to...
  3. AndyTN

    New pool build in Charlotte, NC-Please critique and advise

    Looks beautiful and good luck with everything. Is there a reason you are only having the deep end built for 7 feet? For swimmers, anything deeper than 6 feet is going to make no difference since you can't touch but for kids/adults jumping into the pool, you will want it to be at least 8 feet or...
  4. AndyTN

    Polairs 280 - trying to trouble shoot pressure valve

    Rebuilding a Polaris is like rebuilding an old car. You can replace all the parts but will have to make several adjustments over a couple weeks to make it work really well. It has been revived with power and the adjustments you had set previously are not aligned with this supercharged system of...
  5. AndyTN

    Pool newbie trying not to get swindled by crooks in Northern Illinois :D

    Get the test done but go ahead and get some polyfill to proactively start filtering out iron. You will have to allow the iron to precipitate to be able to filter it out this way so you also risk iron staining. This is one of two approaches you can take. Second, since you don't yet have any...
  6. AndyTN

    Waste line plumbing??

    Since there isn't really any pressure back on the pump for a waste line then whatever routes your water where you want it without leaking will do the trick. I never would have thought about a radiator hose but those are under pressure with heat in a car engine so I'm sure it will stand up to...
  7. AndyTN

    3" pucks for CYA needs over time

    I use trichlor pucks all summer as supplemental FC while using bleach for dosing after testing. I just buy my trichlor on ebay with generic brands and make sure it doesn't say anything about "blue" so it doesn't have copper in it. You have to purchase at least 25 lbs to make it economical. If...
  8. AndyTN

    Waste line plumbing??

    No harm in having a flexible pip for a waste line as long as it doesn't leak too. Why an automotive hose and not just get a flexible vinyl tubing from the plumbing section at Home Depot?
  9. AndyTN

    Is this algae?

    This is above the water line so it wouldn't make any impact on your test results. Spray some bleach into your coping cracks to see if it kills it. I get dirt accumulating in my coping cracks too. Also, your CYA is low for a SWG. I think it should be 60-70.
  10. AndyTN

    Polairs 280 - trying to trouble shoot pressure valve

    Putting the pressure relief valve aside for now, when was the last time you did a rebuild on your 280? A few years ago mine was sputtering around and not climbing the walls or out of the deep end and once I did the rebuild, it was like I had a brand new cleaner. If replacing the relief valve...
  11. AndyTN

    Redneck Evaporative Pool Cooler

    You live in what is called dry heat. Your pool is going to have plenty of evaporation without having to spray water into the air. People who live in hot/humid climates will not get the same natural evaporation so the pool temp will slowly keep climbing until you hit water in the mid 90's. My...
  12. AndyTN

    Polairs 280 - trying to trouble shoot pressure valve

    My pressure relief valve spits out a little bit of water when the booster pump is on, almost like a small leak. If it's spraying out a bunch of water then you have a crack in it and need a new one. The blue or red discs are normally necessary and will also make your booster pump quieter. If you...
  13. AndyTN

    Redneck Evaporative Pool Cooler

    This made me laugh out loud and my wife asked what I was laughing at. I said "oh just something on the pool forum" and I got a really puzzled and creeped out look. What is the equivalent term in Canada for redneck? Just asking...
  14. AndyTN

    Redneck Evaporative Pool Cooler

    As my 7th grade science teacher taught me "evaporation is a cooling process". The time in the air and total surface area of the droplets will dictate how much evaporation you can get for your climate. You normally want good air time (spray height) with medium sized droplets. If your droplets are...
  15. AndyTN

    Different return eyeball types - explanation needed

    Is anyone able to educate me on the functional differences of the different types of return eyeballs? I currently have inconsistent flow among my 3 returns with the middle being the strongest, shallow end closest to the pump 2nd, and the deep end furthest from the pump is the weakest flow. I...