Recent content by amChess

Hayward PSV3S2 3-way diverter valve - I am replacing the O rings - PSXVZ2A - lube or no lube on the new rings? I used to put lube on my pump cover when cleaning - my pool guy said not to bother - cleaning it with water works just fine for that one. I see one YouTube video about PSV valves...

Tnx, service mode is a good idea. So, the pump has an option to enable or disable "low temperature operation" - like step 13 at this link...

I can't find the answers in the manual or on the web: What is the pump counter counting in "low temperature operation, press resume to cancel" It went into high-speed mode and displayed 7:21, 7:20 one day. It was displaying 4:20 on the second day. It started around 10pm on both days when it got...

Ty, Yes, my initial plan is to keep the old controller. I am just deciding on whether to get something generic for 500-600, or Hayward for 900. If that board poops out in the middle of cell warranty, I want to be able to get a new board and still use up whatever is left of the new cell.

Thank you, did you open the black part? By "splice/short", you mean that the orange and yellow are simply connected under the black epoxy?

I was looking to use W3T-CELL-15 or generic on my old one. Huh - both basic Aquarite and Omni S3 systems require authentication chips now?

I have an old (10+ yrs) Goldline generator/controller. The salt cell went out - thinking whether to replace the whole setup or just the salt cell. Looking at the new models seems that I would get something like this cell or generic -...

Don't exactly but Older than 5 years for sure, could be more. Yes, thinking about how much I had it on - it's way pass 5,000 hours. Good point - tnx

Old GLX-PCB-PRO (old, really old 10-20 years) - resuscitated it couple of years ago by resoldering that high amp connection that fails. T-Cell-15 - the thermistor is reading 6.6 kOhm with temp in 90s - seems reasonable. Washed, re-washed, may have used too much acid - possible that cell's...