Recent content by Alexr54

I was thinking about upgrading a very aged pool pump. Currently i have a Hayward Super 2 with a 1.65hp motor. I was looking at the Hayward W3SP3206VSP TriStar Variable-Speed Pool Pump with the 2.7 HP motor. Its pricey... Does anyone have any other recommendations? Something that can work ok...

Thanks. So the version of my ProLogic Board cant do what i need. I was kinda thinking the same but hoping i was just missing something. The documentation about the suction valves does not really apply to me. The pool and spa have separate pumps/filters. Separate plumbing. Although there is an...

Can someone please help me out with the right way to configure the prologic? My main equipment: 1 Pool Filter/Pump (Inground Cleaning System Caretaker99 that cycles and with one cycle returns to spa for overflow to pool) 1 Spa Filter/Pump - On AUX1 (This is supposed to be just for the spa but...

I have a Hayward Colorlogic 4 (W3SP0527LED100) which stopped working out of nowhere. Nothing tripped, and it's not even flashing. I also have a W3SP0535LED100 which was installed at the same time in the spa, and it's still working perfectly fine. I have a Hayward Prologic board with a...

There are so many repo's im a bit confused which is the best to currently use with Home Assistant. I have a Prologic with a p8 and the elfin ew11 is fully setup. Using the EW11 Script v006.txt script. Can someone share the best repo and script to use with HA? I somewhat have it working in HA...

Thanks! It finally installed. Was so strange. It was waiting for wifi at one point (on my desktop). Then eventually started. All good now, thanks!

Is the AQL-PS-8 Emulator download for windows a dead link? Or is it just me?

Thanks! My water chemistry is actually fine. Having a salt cell with an prologic automation system and a robotic pool cleaner i am sure helps :) I was thinking of it more for show than anything.

You can see my pool in my profile pic. I have two 2" outlets that come straight from a 2hp pump that basically pushes the top layer towards the skimmer at the deep end of the pool. There is on all the way on the bottom left corner, and another on the right side a bit past where the shallow steps...

Sorry for the late response. My issue ended up being both the motor assembly and the line. Luckily it was still under warranty and got fixed at my local authorized warranty center. If it were just the motor/circuit board i would have been able to do it myself. But with the line also being...

If I ever get a new unit like this the first thing I’m doing is opening it up and putting in that water sensor.

After some more testing, i found one motor went bad as well as the motor circuit board. This all started from a small leak that sprung apparently from a defective factory seal. I have a replacement motor on order. By chance does anyone know the exact size of the seal? Couple thoughts; It's...

Ebay Definitely not new. New to me. And better then my obviously burnt circuit board. It seems to have made some progress, now lift works. With one side not running. And no programs work still, with same error 10. Either i plugged in the motors wrong, or i also have a faulty motor. They all...

Soldering on a new capacitor did not fix it. Looks like possibly more was burnt besides the capacitor. The original circuit board would either require professional repair or goes in the garbage. A replacement board should be getting delivered in a few days. All because a top of the line pool...

Eventually I ended up taking off the motor housing. And it was not completely dry inside. The circuit board had a fried capacitor. Most likely from getting wet. Makes no sense to me to replace the entire motor assembly just for a circuit board issue. As much as Polaris would like this. Nope not...