It's no more than 4 years old. Based on searches i have done, that seems to be the threshold for this dreaded error 10.
From my searches, most posts are years old. I was just wondering if there was any new info on this error?
The cleaners propellor starts and runs for about 2-3 seconds when any program is selected, then stops with a solid error:10 code every time.
It is on a GFI outlet, no extension cord. I also tried on another outlet, with same results.
I checked the connector at the main unit and its perfectly clean, goes in nice and tightly. I tried cleaning it with some sandpaper and sprayed some contact cleaner/enhancer on it just for good measure.
I did make sure the filter is clean, also tried with the filter out. The wheels move freely, the propellow moves freely. No obstructions.
There are no visible signs of wear on the line at all. But I suppose the next thing to do is to take the motor out and check the connection at the cleaner end?
It really stinks these things seem to error out after ~4 years regularly. It's almost like a faulty product without polaris acknowledging or honoring it.
It's not a cheap robot, i would think it should last ~10 years without any issues like this.
Is there anything else i should check?
From my searches, most posts are years old. I was just wondering if there was any new info on this error?
The cleaners propellor starts and runs for about 2-3 seconds when any program is selected, then stops with a solid error:10 code every time.
It is on a GFI outlet, no extension cord. I also tried on another outlet, with same results.
I checked the connector at the main unit and its perfectly clean, goes in nice and tightly. I tried cleaning it with some sandpaper and sprayed some contact cleaner/enhancer on it just for good measure.
I did make sure the filter is clean, also tried with the filter out. The wheels move freely, the propellow moves freely. No obstructions.
There are no visible signs of wear on the line at all. But I suppose the next thing to do is to take the motor out and check the connection at the cleaner end?
It really stinks these things seem to error out after ~4 years regularly. It's almost like a faulty product without polaris acknowledging or honoring it.
It's not a cheap robot, i would think it should last ~10 years without any issues like this.
Is there anything else i should check?