Recent content by adadof3

Fully agree with you Miranda, and in fact we chose to shock the pool again last night (not with such a high dosage this time though). Interesting to look at it again this morning, and see that it was clearer still. Definitely will try to keep on top of it this summer, although we are away for...

Thanks for the advice Teapot, but would like to think that the filter is ok. Part of the deal with the cleaning of the pool was to service the pump & filter, topping up the latter with sand, so would like to think there are no problems here. Wouldn't hurt to check though, so will have a look...

At last, some good news to report! Kept shocking the pool until yesterday morning. Milky cloud got no better from one day to the next, but slowly stated to clear as the shock level reduced. Could just about see the bottom of the deep end last night. Added some clarifer, and it was even better...

Hi Kes, There is a dome on the filter backwash, and the water passing through it last night was constantly clear. This is what makes me believe that the filter is not picking up the 'dust' and thus it is recirculating constantly. Also, after vacuuming last night, when I reactivated the pump...

Good point Kes, apologies for the lack of info. Didn't take a reading by the time that I had finished last night, but it was between 15 and 20 at 6am today. Interesting that you suggest not allowing dust to settle on the floor; my thinking here was that vacuuming algae to waste would prevent...

Thanks for all of the responses. Back in office now, so unfortunately can't give you any info on the tablets that I have been using. Will see if I can get that info tonight, but I really don't think that CYA is an issue. For those that have asked location, we are in mid-Essex, out towards the...

Many thanks for all of the responses. Would have to check the tablets etc to see if there is CYA. If there is, then it is likely to be minimal, as the pool was completely emptied and refilled only a month ago. Am fairly sure that the same questions were asked last year though, and it was...

Thanks for the clarification Miranda. We are based in the UK (yes - we do get some sun here occasionally!). CYA is not commonly used in the UK, and I have none in my pool. I put a container at the bottom of my pool last night, and swept around some of the 'dust' to stir it up. I will do a...

Many thanks for all of the repsonses. Pool is covered when not in use (ie most of the time!) with a floating solar cover. There are some gaps, so it would be possible for some pollen to creep in I guess, although the covering seemed pretty even all over the floor of the pool. The covering did...

Hi, Would appreciate some advice. Was a new pool owner last year, and completely lost the battle with the water. It started to cloud, I continued to shock, but got nowhere. See previous posts for detail. Completely drained pool in the spring, and there was a huge amount of what appeared to be...

Thought I would update you. Pool man did get back to me, and came to do the clean/service yesterday. Started the refill last night, my guess is that there is still around a day and a half to go. He is going to return to balance the chemicals when the water is up to the skimmers. Pool is...

Hi, I posted late last year regarding problems that I was having as a new pool owner: green-pool-new-pool-owner-t16161-60.html Had someone look at the pool a month or so back to make some suggestions re opening, his suggestion was a complete drain and refill. He gave me a quote on doing the...

Hi, I thought that it might be worth me posting an update. Turned pump off on the pool a couple of weeks ago, and looked at it earlier this week, and noted that the water is clear! Appears do be alot of very fine dust all over the bottom of the pool, steps etc. Could it be that my shock...

Thanks frustratedpoolmum, but this wasn't mid shock cycle, this was after a decision to abandon cleansing the water until next spring.

Thanks Teapot, I really don't know anything about it at all, and haven't touched it. Electrodes look like this: Does that seem right to you? Definitely wired up, as follows: Cotrol pannel look as follows: Have never done anything with it, this is how it was setup when we moved...