You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
-
If I ever get a new unit like this the first thing I’m doing is opening it up and putting in that water sensor.
-
After some more testing, i found one motor went bad as well as the motor circuit board.
This all started from a small leak that sprung...
-
Ebay
Definitely not new. New to me. And better then my obviously burnt circuit board.
It seems to have made some progress, now lift...
-
Soldering on a new capacitor did not fix it. Looks like possibly more was burnt besides the capacitor. The original circuit board would...
-
Eventually I ended up taking off the motor housing. And it was not completely dry inside.
The circuit board had a fried capacitor. Most...
-
I did this and unfortunately it didn't solve the issue.
A couple fasters were kind of loose in the plug so was hoping that did it by...
-
Thanks.
I did check continuity and was fine when I checked.
But maybe it’s intermittent because of a loose connection.
If it’s just a...
-
Thank you for this!
I’ll be checking that today. And will update here soon as I can.
-
I solved my last error 10 on my polaris robot (basically same one as yours) as per the loose wire fix shown about two minutes into this...
-
Loading…
-
Loading…
-
Loading…