1
Latest activity Postings Media About
-
-
11poolman1 replied to the thread Back Flow Valve.Google "Jandy Check valve."
-
11poolman1 replied to the thread Is my pump on it's way out?.Hence, the beginning of the post, "Most 2-speed pumps will not prime on the low speed," Work on more than yours and you'll see that fact.
-
11poolman1 replied to the thread Is my pump on it's way out?.If its not making noise, if it primes on high and then moves water on low, if it doesn't leak, in other words, "if it isn't broke, don't...
-
11poolman1 replied to the thread Is my pump on it's way out?.Most 2-speed pumps will not prime on the low speed, therefore you will have no water flow if the pump starts and runs on the low speed...
-
11poolman1 replied to the thread How to Isolate Spa from Pool.Valve in the line directly connected to the pump should never be in that position. Handle should point directly left (pool suction) or...
-
11poolman1 replied to the thread Back Flow Valve.Check valve after the heater and in front of that tab feeder (which should be removed) is supposed to prevent heater damage (it won't)...
-
11poolman1 replied to the thread Smaller pipes in and out the pump.Google "Bernoulli's principle" and you will see that the small portion of the plumbing in question has negligible affect on your water...
-
11poolman1 replied to the thread Pool lights.Two new Pentair Amerilites with incandescent bulbs and the appropriate cord length. Replace the bulb with whatever LED bulb you wish and...
-
11poolman1 replied to the thread Hayward SmartMax Star Pump Not Fully Sealed.On the manual valve in the suction line I see some what looks to be corrosion on the two screws on top. That could be an indication of a...
-
11poolman1 replied to the thread Hayward SmartMax Star Pump Not Fully Sealed.Looks like pressure side, non-booster cleaner, probably a 360.
-
11poolman1 replied to the thread Hayward SmartMax Star Pump Not Fully Sealed.Be sure that the lid O ring has lube on it. Swapping a lid that doesn't have lube with another of the same won't fix the problem. If a...
-
11poolman1 reacted to Jimrahbe's post in the thread Please help, issue with flow rate I cannot resolve or figure out with
Love.
Your filter is dirty... Thanks, Jim R. -
11poolman1 replied to the thread Question with pool light fiber optic to led kit upgrade..What is the rated output of the transformer? Should be on the enclosure, but are listed as having a 12V and a 13V tap. Don't know of any...
-
11poolman1 replied to the thread Master temp heater - HLS replaced - prevent rusting in the future.Rust in that area is most often indicative of a heat exchanger leak. For it to have rust the mounting flange for the heat exchanger, it...
-
11poolman1 replied to the thread Pump Upgrade options.Doesn't hurt anything to do that if it makes you comfortable, but not necessary.
-
-
Loading…
-
Loading…
-
Loading…