6XSBChamps's latest activity
-
My Jandy Auqualink is programed to turn the pool on at 7am and has been doing so for 3 years. Everything else is working fine but the... -
6XSBChamps replied to the thread Jandy heater “Fault Check Versaflo”.After a lot of research today I have my own theory. If anyone knows much about these heaters feel free to confirm my thought or tell me...
-
I heard a clicking/buzzing from my heater while pump was running. Heater was not on. The pad had an error message that said Fault Check...
-
6XSBChamps replied to the thread First time cleaning cell.Yes, I’m in the process of adding CYA. It’s hanging in a sock slowly dissolving
-
6XSBChamps replied to the thread First time cleaning cell.CSI -.26 right now.
-
6XSBChamps replied to the thread First time cleaning cell.Temp 71 CC 0 Salt 3.4
-
6XSBChamps replied to the thread First time cleaning cell.
-
-
-
First time I’m cleaning this cell. 2 seasons. Is this considered a lot of calcium or not that bad? Also, I’m still dealing with “no...
-
-
-
6XSBChamps replied to the thread Filter PSI drop.My Man! This was it. I was able to feel around in through the pump basket area and pull out some debris. All good now. This is why I...
-
6XSBChamps replied to the thread Filter PSI drop.Very possible. I have not taken this apart before. How accessible is it to clean?
-
-
-
My psi is consistently at about 20 psi. The last 2 days it has been at 16. What could cause that? I have oak trees that have been...
-
6XSBChamps replied to the thread No Flow LO / cell not coming on.Jandy manual says anytime the Flow /Salinity/ temp sensor is disconnected and reconnected it’s very important for the AC power to the...
