Latest activity Postings Media Albums About
-
-
Texas Splash replied to the thread Old neglected pool, what to do??.As long as the shell holds water, you're halfway there. Plumbing integrity would be another concern, but you can't know for sure if the... -
Texas Splash replied to the thread New to Pools.Also be sure to update your signature with all of your pool and equipment info. If you are on a portable device, you may need to turn...
-
Texas Splash replied to the thread New to Pools.Welcome to TFP! :wave: 10 years huh? Wow. Be sure to take a ton of photos to document this water experiment. That should be...
-
Texas Splash replied to the thread 20 Baum or 20%.Welcome to TFP! :wave: I suspect they mean 20 Baume Muriatic solution (approximately 31.5%). Word of caution, be sure the grids are...
-
Texas Splash replied to the thread Basic test and CYA?.Is that FC number (4) from the actual FAS-DPD powder & drops testing? If so, it's fine. We predominantly use the powder & drops for FC...
-
Texas Splash replied to the thread Basic test and CYA?.Correct. If the dot never disappears, your CYA is a bit low. Normally we recommend a CYA of about 70 for a salt pool as it helps...
-
I always try the gasket first. Even if I have brought a new valve to the jobsite I'll replace the gasket as it is easier, 15- 20...
-
Texas Splash replied to the thread Electrical question.A couple other articles to help. https://www.c-m-p.com/the-essential-guide-to-pool-water-bonding-basics/...
-
Texas Splash replied to the thread Electrical question.There are two things to consider: 1 - The electrical items themselves are "grounded" via the power source 2 - The pool/equipment are...
-
Texas Splash replied to the thread LSI result.When you get a moment, consider updating your signature with all of your pool and equipment info. It will help tremendously in the...
-
Texas Splash replied to the thread LSI result.A small variation in water temp shouldn't be a deal breaker either way, but if you were to err on the side of caution simply due to the...
-
Texas Splash replied to the thread Is it normal for the sand filter?.Water should not leak out of the MPV when on RECIRC, so I would lift off that top handle assy and inspect the spider gasket and diverter...
-
Texas Splash replied to the thread Is it normal for the sand filter?.I wonder if the owners have been turning the handle in both direction? Maybe the gasket got a little pinched or something.
-
Texas Splash replied to the thread Pool pole.Sometimes it's the simplest solution. :goodjob: Happy brushing!
-
I have no experience with AquaClarity, but @Ahhsomeguy could probably answer any questions. As for the tub itself, IMO the water...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
