Latest activity Postings Media About
-
-
pjt replied to the thread Can we get a trouble free pool? I say, Yes, only with all y’alls help, that is!.Or opt to simply not have a main drain. -
pjt replied to the thread Featured New to pool chemical math, advice?.First step is to get a proper test kit. It's absolutely necessary for your success. TF-Pro would be perfect for you...
-
pjt replied to the thread Can we get a trouble free pool? I say, Yes, only with all y’alls help, that is!.CL580 or CV580 Have them install an external heater bypass. Get a PLC1400 SWCG.
-
pjt replied to the thread Chasing pH and TA back and forth at open each year.@KingpenM3 Stop adding baking soda unless your TA (tested with a proper test kit) is 40 or lower. TA down to 50 is perfectly fine. A...
-
pjt replied to the thread Can we get a trouble free pool? I say, Yes, only with all y’alls help, that is!.6' is an awkward depth since it's too deep to stand, but too shallow for diving, etc.. I'd suggest 5' or commit to a true deep end...
-
pjt replied to the thread Riddle me this….Don't have glass in or around the pool. A plastic condiment dispenser works great for your water sample, and costs ~$1 at Walmart.
-
pjt replied to the thread Cartridge filter was very dirty but PSI did not rise..I like simple setups. You have the perfect place to install a SWCG directly adjacent to the aerator T fitting.
-
pjt replied to the thread Cartridge filter was very dirty but PSI did not rise..Keep a disposable hairnet in your skimmer(s).
-
pjt replied to the thread TA question.Keep adding reagent until the drops don't change the color further. If a drop results in color change, count it. If the drop doesn't...
-
pjt replied to the thread Both return and suction side leak.What type of problem do you have? If suitable, I'd highly recommend Plast-aid. It yields much better results than epoxy. I used it to...
-
SC, You need to find better sites to visit.... :mrgreen: To be kind, that is just a load of Bull Feathers.. Pool salt is...
-
Sometimes maintaining a pool seems like you have a second job! It is, however, rewarding and the office conditions aren’t bad. 🙂
-
pjt replied to the thread Testing pool for the first time using legit TFT 100 pro— thoughts on what to do next.Two additional techniques: 1. Try holding the block sideways or upside down. Sometimes that helps distinguish colors better. I also use...
-
I don't have a water meter, so I asked AI, and I'm going to measure the perimeter of the pool by dividing it into two parts: the shallow...
-
pjt replied to the thread Irregular pool size.When you fill, take note of the start and end water meter readings. Subtract estimated household water use, and you'll have a very...
-
-
Loading…
-
Loading…
-
Loading…
