Latest activity Postings About
-
-
OonBalance replied to the thread Calcium Crystals? or Scale?.mgtfp comments are correct. Just keep the pH above 7.0 and TA at 40 ppm and above.
-
OonBalance replied to the thread Calcium Crystals? or Scale?.Your additional information does shed more light on this issue, and you probably answered your own question. Power polishing makes the...
-
OonBalance replied to the thread Calcium Crystals? or Scale?.Unfortunately, I don't have a definitive answer for you on whether the problem is typical calcium scaling or what is known as calcium...
-
OThe acid reacts immediately to convert bicarbonate ion (HCO3-) into dissolved CO2 gas. Once that happens, the acidic proton (H+)...
-
OonBalance reacted to jesse-99's post in the thread Wet polisher/grinder for plaster pools -- found a good one with
Like.
For anyone that plans on wet sanding their plaster pool in the future, I found a really nice polisher on Amazon (Amazon.com) that I just... -
OonBalance replied to the thread Filling pool after replaster, high water table.The pool shell hasn't shifted or raised so far, so that's good. I hope that removing two feet of water doesn't have any negative effect...
-
OonBalance replied to the thread Yellowing on new plaster.I am thinking that the yellow areas are from some calcium build up due to the plaster "dust" hardening in those areas that didn't get...
-
OonBalance replied to the thread Filling pool after replaster, high water table.The seriousness of the high water table problem would cause me to strongly consider waiting for the water table to go down. And the...
-
OThat's good news. Hope everything will get sorted in the end 🤞
-
OUpdate: Took a while, but I finally got the PB company to come out and look at the plaster issue in the spa. The owner acknowledges...
-
OonBalance reacted to AQUA~HOLICS's post in the thread **Inactive*** Rebar rust and prep for StoneScapes Mini with Like.
My opinion from the seeing these photos is that you need to have an actual expert in this type of fied as to what is causing the current...
-
OonBalance reacted to ajw22's post in the thread **Inactive*** Rebar rust and prep for StoneScapes Mini with Like.
Your pictures give no context as to the size and position of what is shown. Show us some overall pictures of the pool and identify...
-
OonBalance reacted to Newdude's post in the thread Newb OB with BYOP in Buckeye AZ - Short vacation pH and FC question with Haha.
7.85 and 7.479
-
OonBalance replied to the thread 12 May 2024 Equipment and Controls While Thin Set Dries.With your TA and CH at those levels, once the pH reaches 8.0, I would start adding acid to keep the pH below 8.0 but also above 7.6. And...
-
OonBalance replied to the thread Bicarb Startup Question.Sounds like a good plan for checking the water volume. Glad to see that the plaster guy will remove the plaster cream and not water...
-
-
Loading…
-
Loading…