Latest activity Postings Media About
-
-
Dirk replied to the thread 10 Day Old IC-40 Just Went Dark.Rosin core. Low wattage iron. What's critical is that you work quickly, with as low a wattage as will melt solder. What you don't want... -
I use an old RadioShack adjustable wattage soldering iron. It will output from 0 to 50 watts. I can fine tune the heat I need for the...
-
The testing you did would not have included the IPH connectors AND the resistance they would induce into the circuit - which would have...
-
Dirk reacted to HermanTX's post in the thread Guidance needed, 3 years using TFP and I am at a loss (Solved) with
Like.
One idea is to set the SWCG at your desired replacement FC ppm, then add liquid chlorine to reach the level of FC you want to hold. So... -
Dirk reacted to Bperry's post in the thread Guidance needed, 3 years using TFP and I am at a loss (Solved) with Like.
No need to waste your reagents with the 25ml sample.
-
Dirk replied to the thread 10 Day Old IC-40 Just Went Dark.Looks like one of the pins (connected to one of the black wires) is going. Apply the red-red, black-black fix (if the IpH is no longer...
-
-
-
@Lake Placid @JamesW @ajw22 @Dirk I guess the next thing to do is take this new IC-40's power cord directly to the power out on the...
-
Dirk reacted to jsnpckns's post in the thread Guidance needed, 3 years using TFP and I am at a loss (Solved) with Like.
New sample 10 ml 15 drops, 7.5 FC 25 ml 32 drops, 6.4 FC I know comparing apples to apples, so going to go with comparing the 9 FC...
-
Dirk replied to the thread Guidance needed, 3 years using TFP and I am at a loss (Solved).The Pool Math app allows you to track test results for more than one pool. You can create a "pool" called "City Water" and then test CH...
-
update Plumbing and light have been run from pool to equipment area, trench backfilled, pool partially backfilled, and made it through...
-
Dirk replied to the thread Intelliph not working.Haven’t replaced mine yet. But @12164RLL just did. Maybe he learned a trick or two.
-
The roller head just pulls out. Might be stuck and corroded. Use some penetrating oil., no solvents. The screws for the rollers dont...
-
Dirk replied to the thread Just wondering where you guys would cut and plumb.The only reason to replace is if the body is cracked or otherwise defective. But to answer your question, you measure the depth of one...
-
-
-
Loading…
-
Loading…
-
Loading…
