Signed contract last night, deposit paid!

Jump to latest Follow Reply
I don't see a problem with it. Where is the pad in relation to the pool and will it be an eye soar. If the pad is out of the way, then I think the rubber pads will work fine.


Sent from my iPhone using Tapatalk
 
The pads can help with noise as well. My AC is on a pad like that and has been there for 12 years BUT it does not have the water on it like my pool pad does which was poured as I made it and poured it in the forms.

IF you really want a poured pad you CAN do it in a large wheelbarrow and shovel. Make a 2x4 frame and dig down some to make it good and thick.

Kim
 
kimkats said:
The pads can help with noise as well. My AC is on a pad like that and has been there for 12 years BUT it does not have the water on it like my pool pad does which was poured as I made it and poured it in the forms.

IF you really want a poured pad you CAN do it in a large wheelbarrow and shovel. Make a 2x4 frame and dig down some to make it good and thick.

Kim
Click to expand...

Kim,
That is funny cause I was thinking about just pouring my own pad. But the guy that is helping me with the pool is telling me they are actually more crack resistant than concrete.


Sent from my iPhone using Tapatalk
 
Well, pool pads don't carry a whole lot of weight so a good poured concrete pad shouldn't crack unless it's not properly mixed and cured. You could use steel mesh to reinforce it but that's overkill. I think the rubber pads will work just fine especially being behind a wall. Heck, if I ever redid my pad, I'd consider using those instead AND I may consider them for my proposed (aka, still in my head) rainwater collection system.....thanks for posting the info!!!


Sent from my iPhone using Tapatalk
 
All my equipment is on the prefab pads and it's been fine for ten years. I actually prefer them. I know if I have to change plumbing or equipment, I can just pick up the pad and replace or move it. The last thing you want is concete poured with your plumbing coming up through it and having to replumb or move those pipes.
 
chiefwej said:
All my equipment is on the prefab pads and it's been fine for ten years. I actually prefer them. I know if I have to change plumbing or equipment, I can just pick up the pad and replace or move it. The last thing you want is concete poured with your plumbing coming up through it and having to replumb or move those pipes.
Click to expand...

Chief, this make sense, I guess I never thought of that.



Sent from my iPhone using Tapatalk
 
ca71fd7b6b5485ff1f020be474a2fa86.jpg


Enjoying a jack and coke out by my new pool! Isn't she beautiful ?


Sent from my iPhone using Tapatalk
 
Whoo Hoo. Moving right along. :party:

To answer your question in comment #108, Yes, she is a beauty. You think she's beautiful now, just wait until you see all that crystal clear water in there. Awww, life doesn't get any better than this. Enjoy the beautiful view. :)
 

Enjoying this content?

Support TFP with a donation.

Give Support
azjoshers79 said:
Kim,
That is funny cause I was thinking about just pouring my own pad. But the guy that is helping me with the pool is telling me they are actually more crack resistant than concrete.


Sent from my iPhone using Tapatalk
Click to expand...

Whenever I build a new pool, do a remodel, or even just an equipment upgrade I ALWAYS pour a 4" thick slab. The portable slabs have a criss-cross of 3/8" rebar inside that creates a weak point for the too-thin concrete. They will all fail, it's just a matter of when. I'd investigate their cost of a poured slab. I pay about $100 to $300 per job depending on size.

Here's a pic of a recent job:

Broken equipment slab.jpg
 
poolkid said:
Whenever I build a new pool, do a remodel, or even just an equipment upgrade I ALWAYS pour a 4" thick slab. The portable slabs have a criss-cross of 3/8" rebar inside that creates a weak point for the too-thin concrete. They will all fail, it's just a matter of when. I'd investigate their cost of a poured slab. I pay about $100 to $300 per job depending on size.

Here's a pic of a recent job:

View attachment 43461
Click to expand...

Thank for the info. I have been digging around the Internet and these new poly molded pads are getting good reviews and seem to be holding up better than the concrete throw downs. Of course I would prefer to pour a permanent pad. But I have budget restrictions. I just added a 4th savi led light and natural stone to my seating wall. I also added stone columns to my patio and the price went up about 1000. Gotta be careful with money


Sent from my iPhone using Tapatalk
 
I think you'll do fine with the poly molded pads. As I said, it's behind a wall and out of sight, even if they start to fail or look worn out for some weird reason that will have absolutely zero impact on your pool. It's really not something I think you should be wasting a lot of brain-cycles on.


Sent from my iPhone using Tapatalk
 
azjoshers79 said:
Thank for the info. I have been digging around the Internet and these new poly molded pads are getting good reviews and seem to be holding up better than the concrete throw downs. Of course I would prefer to pour a permanent pad. But I have budget restrictions. I just added a 4th savi led light and natural stone to my seating wall. I also added stone columns to my patio and the price went up about 1000. Gotta be careful with money


Sent from my iPhone using Tapatalk
Click to expand...

One of the tricks I use on new pools is to hold off setting the equipment when they initially plumb the pool. We just manifold all of the pipes together for the pressure test. Then we form up a pad before the shotcrete guys show up. Once the concrete truck shows up I ask them to pump the form full of mud and finish it. It's a little extra work but the cost is really low. The plumbers have to come back and set up the equipment later on. Some charge for the extra trip and some don't.

Best of luck with whichever way you go! :cheers:
 
Worst case, setup some 2x4's and mix up a few bags of concrete yourself. Really no hit to the budget. That gets you what you really want. The concrete pads are ok to but can shift, though not likely in AZ.
 
So rebar and rough in plumbing/electrical are complete.
Holding pattern to wait for first
Inspection. I'll post some photos tomorrow. Starting patio work Saturday am. Moving fast so far. Added a 4th Savi Light (no extra cost).


Sent from my iPhone using Tapatalk
 

Enjoying this content?

Support TFP with a donation.

Give Support
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply