***Cleaner will start after safety delay***

[LRenee]

Hello All. I'm new to this forum, but WOW! am I happy to have found y'all! I'm not even sure if I've done this right or posted correctly, so I'm sorry if it's in the wrong place!

We moved into this home 1 year and 5 months ago have had "pool school", and our wonderful local pool guys (LeMasters) over for various reasons, but not lately. About 3 months ago, the "cleaner" would randomly turn on with this message displayed and I would turn it off from the indoor keypad. I don't have a cleaner (I wish I did), all I have is a manual vacuum that I hook up to the basket. Can anyone help me understand this or should I just call the pool guys? Thank you in advance!

 

[ajw22]

Welcome to TFP.

What pool control system do you have?

Show us pictures of the control panels.

 

[LRenee]

Welcome to TFP.

What pool control system do you have?

Show us pictures of the control panels.

Jandy Aqualink RS6...

 

[ajw22]

You have a Jandy Aqualink system.

It looks like you used to have a Polaris pressure cleaner with a booster pump on the system.

Dip switch #1 makes AUX1 be labeled CLEANER. You can get rid of the warning message by turning off dip switch 1. Power off the Aqualink panel, open up the panel and the dip switches are on the left side of the control panel. Flip switch 1 OFF and then close up the panel and power it up.

You have the "All Button" control panel. Your manual is at https://cdn.fluidrausa.com/-/media/...6594.pdf?rev=fa167047bf1644a093de0dbd96d6ff54

Page 28 covers programming the All Buton panel.

You should check if there is a schedule for the AUX1 CLEANER turning it on.

Press MENU>REVIEW then press AUX1 CLEANER button and it will display any schedules set for the cleaner.

 

[LRenee]

You have a Jandy Aqualink system.

It looks like you used to have a Polaris pressure cleaner with a booster pump on the system.

Dip switch #1 makes AUX1 be labeled CLEANER. You can get rid of the warning message by turning off dip switch 1. Power off the Aqualink panel, open up the panel and the dip switches are on the left side of the control panel. Flip switch 1 OFF and then close up the panel and power it up.

You have the "All Button" control panel. Your manual is at https://cdn.fluidrausa.com/-/media/...6594.pdf?rev=fa167047bf1644a093de0dbd96d6ff54

Page 28 covers programming the All Buton panel.

You should check if there is a schedule for the AUX1 CLEANER turning it on.

Press MENU>REVIEW then press AUX1 CLEANER button and it will display any schedules set for the cleaner.

WOW! Thank you! I'll do that right now!