Cut in liner

Everett_88

Gold Supporter
Sep 12, 2023
162
Wichita
Pool Size
15000
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-40
This cut is from an umbrella that fell in and cut it. Brand new liner. 😳

It’s not leaking. It’s been this way for 2 months and I just noticed it.

I can patch it. That’s easy.

But, patch looks goofy.

Is there an adhesive I can use to just mend this spot?

It’s on the end of that wrinkle. No issue with the wrinkle.

RenderedImage.jpeg
 
It’s on the end of that wrinkle. No issue with the wrinkle.
Was the wrinkle always there? Kinda really sus that an umbrella chose exactly that spot to land.

But, patch looks goofy.

Is there an adhesive I can use to just mend this spot
If there was, nobody would use ugly patches. :(
 
  • Like
Reactions: Mdragger88
Wrinkle has always been there.

So you suggest patching it?

Any harm in using the adhesive and seeing if I can get that flap back in place? Worse case, if/when it starts actually leaking I’ll patch it?
 
Thanks! I bought this and will use it.

Boxer 100 kit
That is perfect & really the best one!
The one i posted I would consider pretty good but not much supplies. Its just widely available same day for those in a bind/emergency - which a rip usually is.
 

Enjoying this content?

Support TFP with a donation.

Give Support
That is perfect & really the best one!
The one i posted I would consider pretty good but not much supplies. Its just widely available same day for those in a bind/emergency - which a rip usually is.
Thanks! This cut is like 3/4” wide and is not leaking. It’s been there for 6 weeks, at least. So, I’m hoping I can just use the clear patch to cover the cut and keep it from progressing.
 
  • Like
Reactions: Mdragger88
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.