It’s open! It’s green! Looking for help! TEST RESULTS ADDED!

Jump to latest Follow Reply
EmilyOTR

EmilyOTR

Bronze Supporter
Feb 15, 2017
764
Ferndale, MI
Pool Size
15000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-40
As you may have seen, I had a mishap this winter. Late February my cover blew open and cover water and leaves got in. I don’t know how much. Fast forward to today, it’s open and green but CLEAR. Im unconcerned about the green and staining. It will clear up with chlorine. The concern I have is the stuff growing on the walls.

Once my pump is running for a couple hours I will test and confirm there’s no ammonia.

added photos

IMG_5082 (1).jpeg
IMG_5083.jpeg
 
Last edited:
  • Like
Reactions: Newdude
added photos. pump is running, I do have a leak at my backwash um, outlet? I don't know what it's called. the pool guy plugged it up but it's still leaking so now I have to figure out what to do there. anyone know?
 
Last edited:
EmilyOTR said:
add photos. pump is running, I do have a leak at my backwash um, outlet? I don't know what it's called. the pool guy plugged it up but it's still leaking so now I have to figure out what to do there. anyone know?
Click to expand...
Pics of the backwash leak area?
 
proavia said:
Brush the pool. If any of the stuff settles out, scoop it all out.

Post a full set of current test results once tge pump has been running for a while.

After you are sure there isn't an ammonia, SLAM Process
Click to expand...
I brushed the pool but that stuff on the walls doesn't budge. I'll have to have my husband try or we will have to use something else and stick our hands in. the water is 52. brrrr..
 
Begin the SLAM Process after you're sure there isn't any ammonia.
Follow the SLAM Process to the letter.
Remember - CYA 30 and pH 7.2 before you start.
If you need to add CYA, use the sock method. Once hanging, consider it added and use the appropriate SLAM level for FC.
 
EmilyOTR said:
View attachment 567210
So the pool guy said it might stop and the leak has decreased, even in the past 20 minutes or so. maybe it will?
Click to expand...
Chances are that the multiport spider gasket is bad.
With the pump off - remove that plug, clean the plug and the area in/around where the plug goes and then try reinstalling the plug.
Long term solution is to fix what is causing the leak.
 
proavia said:
Chances are that the multiport spider gasket is bad.
With the pump off - remove that plug, clean the plug and the area in/around where the plug goes and then try reinstalling the plug.
Long term solution is to fix what is causing the leak.
Click to expand...
yes a spider gasket is what he said I needed. is that not the long term solution? and I don't want to reinstall the plug, I want to attach my backwash hose so I don't have to do that all the time.
 

Enjoying this content?

Support TFP with a donation.

Give Support
EmilyOTR said:
yes a spider gasket is what he said I needed. is that not the long term solution? and I don't want to reinstall the plug, I want to attach my backwash hose so I don't have to do that all the time.
Click to expand...
Yeah - that is the long term solution.

What I wrote about the plug and cleaning the area is temporary.
You're most probably going to need to backwash a few rimes during your SLAM and will need that port open to do so.
 
proavia said:
Yeah - that is the long term solution.

What I wrote about the plug and cleaning the area is temporary.
You're most probably going to need to backwash a few rimes during your SLAM and will need that port open to do so.
Click to expand...
thanks, do you know where I can get a multiport spider gasket and will it need to be a certain size? And based on my clear lack of knowledge here is this something I can do?

also the plug has popped out and as soon as I put it back in it's out again. it's leaking just slightly more with it out.
 
Pool store probably
You will need the multiport brand and model number as the gaskets aren't universal.
Filter make amd model as well - and take a few pics to show the PS as well.

How do you attach a backwash hose?
 
proavia said:
Pool store probably
You will need the multiport brand and model number as the gaskets aren't universal.
Filter make amd model as well - and take a few pics to show the PS as well.

How do you attach a backwash hose?
Click to expand...
with the hose and a metal thing that wraps around it? Isn't that normal? lol
 
EmilyOTR said:
with the hose and a metal thing that wraps around it? Isn't that normal? lol
Click to expand...
It is for many, yes.
EmilyOTR said:
also can I use my Dolphin S200 in 52 degree water?
Click to expand...
You may. (y)

If given the choice though, nothing vacs like the old skool manual vac. Especially if there is heavy debris. They aren't designed for that although they do their best to try.
 
Newdude said:
It is for many, yes.

You may. (y)

If given the choice though, nothing vacs like the old skool manual vac. Especially if there is heavy debris. They aren't designed for that although they do their best to try.
Click to expand...
no heavy debris. pool store vaccummed it beautifully. I'm just thinking it might brush this stuck on stuff off the walls.
 
ok potentially really dumb question. I don't measure chlorine, as I never use it. so I don't have anything. Pool math said to add 1.2 gallons, so I estimated. even if I measured, my 15,000 gallons is an estimate anyway, so it's not perfect. Do I need to test to see what my chlorine is at. or in 30 minutes I might have close to zero chlorine, or I'll have something and Ill know if I have ammonia that way?

good news - look at the color 5 min after adding.

IMG_5088.jpeg
 
You guessed close enough. You'll know it's ammonia when the FC is a 2 or a 4. You didn't miss by that much.

We'll reasses if the test comes back borderline at 7.5 FC.
 

Enjoying this content?

Support TFP with a donation.

Give Support
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply