Used to use bleach but almost $7 a bottle now. Been using pucks since the insanity knowing the affect on CYA. Went out of town for maybe a week and have been struggling since. Not sure if old chemicals are messing with results...
FC- 35...is this even possible?
CC- 0
TC- 35 and maybe higher, I gave up on the test after the solution would not turn clear
pH- 7.2
CH- 400
TA- 140
CYA- 110-120
The shallow end where the steps and sunshelf are has to be brushed twice a day. There's a sediment that collects and looks like pollen when disturbed. The Polaris doesn't visit this end of the pool and has never gone very shallow. Skimmer baskets (2) often have a green film floating and sometimes even green bubbles floating on top. How can there be algae with FC of 35? When this all started I was putting hairnets in the baskets and they were usually green. Been running the pump a bunch. The pool is mostly blue but not terribly clear. It's been better before.
Pump uses paper filters and should be replaced but I don't want the new filters contaminated with algae. Hoping to clear it up first.
Plaster looks a little blotchy from what I remember. Pool Math says my CSI is fine.
Want to clear this up and go salt. Thanks
FC- 35...is this even possible?
CC- 0
TC- 35 and maybe higher, I gave up on the test after the solution would not turn clear
pH- 7.2
CH- 400
TA- 140
CYA- 110-120
The shallow end where the steps and sunshelf are has to be brushed twice a day. There's a sediment that collects and looks like pollen when disturbed. The Polaris doesn't visit this end of the pool and has never gone very shallow. Skimmer baskets (2) often have a green film floating and sometimes even green bubbles floating on top. How can there be algae with FC of 35? When this all started I was putting hairnets in the baskets and they were usually green. Been running the pump a bunch. The pool is mostly blue but not terribly clear. It's been better before.
Pump uses paper filters and should be replaced but I don't want the new filters contaminated with algae. Hoping to clear it up first.
Plaster looks a little blotchy from what I remember. Pool Math says my CSI is fine.
Want to clear this up and go salt. Thanks