- May 17, 2022
- 24
- Pool Size
- 28000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
No worries at all! I appreciate your perspective. I also have a jetted Hot Springs tub that is waiting to have electrical trenched in, so I'll need to gather some TFP info on that one eventually too! Ahh-Some purge is def on the list.The one time I don't go back and re-read the entire thread, oh boy ... yes, yes, yes, you have EXACTLY the kind of situation that demands thinking outside the box. I forgot the thread pertained to a cedar tub!
My comment was directed to a plumbed system (i.e. inside a hot tub), but that's not quite relevant to your situation, my apologies!!!
I still think less is more, but I also think the Aqua Clarity could be helpful. To use Ahh-Some! I'm not sure since agitation seems to be key in most mentions of it I have no idea how it plays in.
Here's what I recently found someone had done that needed to aerate (again, not sure it's required)
While I stand by my (misplaced) comments, they are obviously not much help in resolving your situation - however, having no rashes in two years of use is a positive note even if the smell of mildew obviously demands concern...
Now, I'm REALLY hoping to find out if the Aqua Clarity turns out to be a solution to the slime issue, I'm actually betting it will be!
P.S. You mentioned an ionizer. Just be aware if that was capable of keeping up sanitation requirements (along with bromine and MPS), it might be subject to failure, and I'm not sure you would have any way of testing to see if it was working or as effective as when it was installed.
I just got the AC in the mail yesterday so plan to start it in the next couple days. I'll definitely report back!
Interesting point about the ionizer. I actually realized it wasn't working after I finally got a copper test kit and it read a whole 0ppm
If the copper level is adequate, then it theoretically should be sanitizing effectively. Hard to know without a test for bacteria!