Pentair Laminar Jets - Which pump to use

[mpiucco]

I've purchased 2 Pentair MagicStream Laminar Color LED Light | Grey Deck Lid | 580001G and I am not sure which pump to get.
Manual says: To achieve the maximum laminar arc height, a water supply of 10 GPM with 16 ft of head (measured at the laminar) is required.

2ft drop, 40 ft long pipe.

Which pump I need to achieve maximum laminar arc height considering I'll have 2 laminar jets connected to the same pump?

Thank you for your help.

 

[ajw22]

Welcome to TFP.

Feeding two Laminars will take 20+ GPM.

Looks like a Pentair AFP-75 pump can easily deliver that or more.

Put a diverter valve in each Laminar line to adjust the flow for each.

WaterFall Specialty Pumps

The Pentair Waterfall Specialty Pool Water Features Pump has a closed impeller, low-head pump ideal for water features such as fountains, waterfalls and other special pool features.

www.pentair.com

 

[mpiucco]

Welcome to TFP.

Feeding two Laminars will take 20+ GPM.

Looks like a Pentair AFP-75 pump can easily deliver that or more.

Put a diverter valve in each Laminar line to adjust the flow for each.

WaterFall Specialty Pumps

The Pentair Waterfall Specialty Pool Water Features Pump has a closed impeller, low-head pump ideal for water features such as fountains, waterfalls and other special pool features.

www.pentair.com

View attachment 406823

Thank you very much! Appreciate

 

[jbrees]

did you end up using the afp-75? Just curious how they are working? We have 2 laminars and 2 bubblers and deciding if we want to use a sep pump.