I was finally able to purge for the first time with Ahhsome as the weather warmed up for the first time since we got the new tub at the end of February.
During the purge I ran the tub jets on high for an hour and got TONS of foam (overflowing). I did get some green scum around the edges but not a ton. Enough to make me feel like it worked well. I think I may have used a bit too much Ahhsome as I had so much foam.
I then drained the tub, wiped it and cleaned it completely, shop vac’d etc.
I filled the tub and turned the jets on. When the high jets came on there was some “soapy foam”. They looked like bubbles. Is this some extra Ahhsome that remained in? Do I need to drain and refill again?
During the purge I ran the tub jets on high for an hour and got TONS of foam (overflowing). I did get some green scum around the edges but not a ton. Enough to make me feel like it worked well. I think I may have used a bit too much Ahhsome as I had so much foam.
I then drained the tub, wiped it and cleaned it completely, shop vac’d etc.
I filled the tub and turned the jets on. When the high jets came on there was some “soapy foam”. They looked like bubbles. Is this some extra Ahhsome that remained in? Do I need to drain and refill again?