- Mar 29, 2021
- 105
- Pool Size
- 10000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-30 Plus
Finally got my TF-100 kit today and of course I ran out to the pool to test it.
Here are my results:
FC: 8.5
CC: 0.5
PH: 7.5
TA: 80
CH: 425
CYA: 90
Water Temp: 74F
CSI: -0.34
For comparison, here are the results I got from my local pool store:
FC: 10+
CC: 0.0
PH: 8.2
TA: 65
CH: 290
CYA: 50
Water Temp: 65F
CSI: 0.27
I think the results from the pool store which were taken almost 6 days ago, were a bit iffy?
Based on their recommendations, I added 48 oz of stabilizer and 14 oz of muriatic acid.
The CH numbers are really far apart though and I want to say the TA as well.
What you guys think? What should be my next course of action.
BTW, I still have not activated my SWG since I installed it last weekend. I'm waiting for the FC to drop to around 3 or 4 then I'll activate it at a slow rate and try to find the right power to maintain it around 5 to 6.
Looking for suggestions on what to do next and where does my pool's condition stands right now.
Here are my results:
FC: 8.5
CC: 0.5
PH: 7.5
TA: 80
CH: 425
CYA: 90
Water Temp: 74F
CSI: -0.34
For comparison, here are the results I got from my local pool store:
FC: 10+
CC: 0.0
PH: 8.2
TA: 65
CH: 290
CYA: 50
Water Temp: 65F
CSI: 0.27
I think the results from the pool store which were taken almost 6 days ago, were a bit iffy?
Based on their recommendations, I added 48 oz of stabilizer and 14 oz of muriatic acid.
The CH numbers are really far apart though and I want to say the TA as well.
What you guys think? What should be my next course of action.
BTW, I still have not activated my SWG since I installed it last weekend. I'm waiting for the FC to drop to around 3 or 4 then I'll activate it at a slow rate and try to find the right power to maintain it around 5 to 6.
Looking for suggestions on what to do next and where does my pool's condition stands right now.