My pool is going to be converted to a SWG soon, so although I'm still using liquid chlorine, it is only temporary. As I was getting my water balanced to the right levels, I noticed my CSI seems a bit low.
Curious how people would recommend raising it? I'm not sure if CH should be higher or lower (feels like I've read conflicting info). And then if TA or pH should be the thing I try to keep higher than it is now?
Some info: the pool is some sort of concrete with natural rock coping and a small natural rock waterfall. Spillover spa into pool. About 10,000 gallons in Florida.
Last test results:
CSI: -0.29
pH: 7.7
TA: 70
CH: 420
CYA: 60
Temp: 67
Salt: 3200
Borates: 50
Not relevant to CSI, but FC is 8 and CC is 0.
Thanks!
Curious how people would recommend raising it? I'm not sure if CH should be higher or lower (feels like I've read conflicting info). And then if TA or pH should be the thing I try to keep higher than it is now?
Some info: the pool is some sort of concrete with natural rock coping and a small natural rock waterfall. Spillover spa into pool. About 10,000 gallons in Florida.
Last test results:
CSI: -0.29
pH: 7.7
TA: 70
CH: 420
CYA: 60
Temp: 67
Salt: 3200
Borates: 50
Not relevant to CSI, but FC is 8 and CC is 0.
Thanks!