Hoping someone can help me out. Background, I’ve had my pool for a year now and have had the same issue occurring since then. There’s been 3 different companies come out to try to fix this problem, all they’ve done is replaced the pump and drive 2 times now. It’s a fiberglass pool, 4 seat jets, 2 deck fountains, all pentair 3hp VSP, intellicor salt cell, intelliconnect, silencer air blower for the seat jets when enabled, a pentair cc 100 cartridge filter, and Hayward electric heater/chiller (installed after pool construction). Here’s my issue, I have it programmed at 1800rpm 24/7 with a day and night clean for an hour each. Even though it’s programmed, it shuts off and then starts right back up sporadically (I was able to catch it in the act on the video). I had to disable the priming function bc every time this happens it shoots the jets on the patio. There’s no bubbles coming out of the returns and it stays primed, yet this still happens. Please flood me with your knowledge explaining it to me like a 5 year old as I’m new at this. Appreciate it in advance!