Is there any other way to control Jandy Watercolors LEDs other than the junction box controller. Looking to connect to my Homeseer automation software. Anyone know the protocol it uses for control?
Jandy Watercolors LED controller
- Thread starter Bugman1401
- Start date
- Jun 7, 2017
- 9,135
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
They work with AQUALINK but it's simple just an automated on and off. There is no protocol.
- Jun 7, 2017
- 9,135
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
Switch the circuit on and off until it rotates to the selected color or theme. This is how AQUALINK does it. Pool tech is really quite antiquated.
I’m convinced there is a protocol. I have a One-Touch remote control wired via RS-485 (4-wire). I assume 2 of the wires are for power of the One-Touch unit. Would like to control my Jandy Watercolors without having to toggle the on/off on the One-Touch every time I want to change colors.
There is a protocol that seems to be well documented here....
GitHub - sfeakes/AqualinkD: Daemon to control Jandy Aqualink RS pool equipment from any home automation hub (Alexa, Homekit & Siri, Home Assistant, smartthings, domoticz etc) or web browser.
Daemon to control Jandy Aqualink RS pool equipment from any home automation hub (Alexa, Homekit & Siri, Home Assistant, smartthings, domoticz etc) or web browser. - GitHub - sfeakes/AqualinkD:...
github.com
Similar threads
