Jandy Aquapure

Walter2050

Silver Supporter
Jul 11, 2021
121
Montgomery Tx
Pool Size
15000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Jandy Aquapure 1400
After go through the freeze in Texas my jandy aquapure is still flashing LO. Temp outside is 66 and pool water temp is 53 . Does the system go off the outside temp or the water temp ? Also does anyone know what the cutoff temp is ?
 
Thank you sir . Being that my water temperature isn’t below 51 degrees and is reading 53 could that be a bad sensor ?
The sensor for the AquaPure are erratic. My salt reading by the AquaPure rarely aligns to the real salt level with the Taylor test kit. The water sensor that is in your PVC pipe can be inaccurate if old. It is good to replace it every couple of years.

Any time pool temperatures drop below 55 degrees F it is best to switch to Liquid Chlorine for the month or so. THer is no sense wearing out the SWCG when it is easy just to add LC every 5 days or so.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.