No, the air seems less and the pump is drawing from the skimmer. There is a small pocket of air in the top of the window of the clean out of the WhisperFlo, but it doesn't have 'extra' air coming in from the O ring area.
mhoy said:No, the air seems less and the pump is drawing from the skimmer. There is a small pocket of air in the top of the window of the clean out of the WhisperFlo, but it doesn't have 'extra' air coming in from the O ring area.
mhoy said:Since the FC went up I guess I should remove the floating puck thing as it's continuously adding CYA and Chlorine via pucks (and I've more than enough CYA). Not sure what to do with wet pucks, maybe I'll just dial the setting real low on it. Hmm, I could do the puck test on some staining that I have...
mhoy said:For the tests I'm using the nifty stir thing so at least I know things are mixing well.
Diluted pool water with 2/3 tap water to figure out CYA level.
CYA 240
FC 13.5
CC 0.5
mhoy said:The HF pumps look like a hit and miss with quality on the seal, but certainly cheap enough. It's a short drive if I get one that fails immediately. Probably get their 1.5" PVC discharge hose too as it rolls up nice and small when done. I'll head down there