Search results

These things are horrible; they all eventually leak and fail. Paying $1300+ is robbery, there is well under $100 in parts inside of these. But I am locked in... Anyone sell these at a more reasonable price?

Pump setup:

Question 1 – I have a Jandy RS IQ2.0 system that has Freeze Protect Mode. When configuring Freeze Protect, shouldn’t I include CLEANER mode so the return to the pressurized cleaner port in the pool gets water moving through it? The problem is that when I include CLEANER in the configuration...

Re: Issues with air in the Jandy pumps, long time to prime Yep, you nailed it. BOTH pumps (only 6 months old) required completely new lids / seals by the pool company. Once they replaced the entire lid on both pumps I noticed an immediate difference in how tight they were. The pool service...

Re: Issues with air in the Jandy pumps, long time to prime Thanks! Signature updated with more details. In the OP I noted I did clean the Jandy CV460 but I will check the valves on it as well as the seals for the pump lids and the seals in the unions on the suction side of the pumps. Updated...

The pool was completed in May of this year and has been very reliable. But in the last month I have noticed issues with the pumps. I can tell there is an issue when the spa water fall into the pool is poorly formed or when the Polaris vacuum does not operate properly. We have a Jandy PS6...

New issue: We are now able to update results and have it report in the LOGs section between devices. But, my "Overview" page is showing the last log I entered, not the more recent results entered from the second device. Also, the second device entered Maintenance notes for Brushing and...

Thanks for the quick response, email to follow. I confirmed logging in with the same credentials and that both have the same account ID. Still having the same issue.

UPDATE - 3rd time logging out and logging back in from the affected device solved the issue. Thanks to MOD and ADMIN for responding so quickly, and on a Sunday! Original Post below: I subscribed to the Pool Math Premium app in iTunes and want to share with my wife so we can both record...

New pool with the PDA. Wanting to have PDA at the pool for basic equipment on/off control but also the App and Web GUI for easier programing. Spent a lot of time researching Jandy (tech support and manuals), YouTube, Amazon, etc. I have the upgrade kit here ready to go. Looks like a...

Thanks for the info!

Thank you for the info. Will research more on the Ozone (despite that it is already installed). Bought into killing bacteria and believing it helps with the FC.

Thanks so much for your reply! Now I understand the relationship of recommended FC levels and CYA! I was using the test strips the pool builder left behind for startup. Since then I acquired the Taylor 2006 kit and found the CYA to actually be 85! Will switch to liquid chlorine after...

I have a new chlorine pool using the Fusion chlorinator that takes the 3" Trichlor tablets. And I have an ozone generator. I found the Pool Math App today and like the experience but I am confused on "chemistry" and the App's recommended FC levels. I have the app set to "Bleach" for...

New pool with a Jandy PS6 PDA and a variable speed pump. On four occasions I have switched to Cleaner mode from Pool mode but the variable speed pump does not ramp up to the higher RPM pre-set in the controller. Generally this works without a problem but oddly I have had issues and found that...