Search results

Any input ?

2 videos. One with filter on and the other with filter off.

My brother has above ground. Bought a Hayward heat pump hayward w3hp50ha2 heatpro heat pump this year and first season using it. All of a sudden there’s no display and a constant low beep to it. I have videos I’ll try to post. With pool filter on and heat pump fan running it peeps. With pool...

Back to bromine it is

I have a hydropool serenity spa. 1st year used bromine. This winter i switched to mineral sticks instead of added bromine. I noticed since going to mineral sticks in the summer now that it’s been getting hot the water smells very moldy/mildew. I usuallly dont add anything to the water with...

Update turned up swg to 60% and run pump about 11 or 12 hours per day. It’s been two weeks it’s been great nice and clear. So increasing duration must have been the key to increasing my FC in the necessary range. I probably didn’t need to buy a new salt cell 🤦‍♂️

Oh there’s def some algae

I’ll increase the time I run the the pump and swg. I didn’t think in last years I ran it that long. Just checked the levels. CYA is 50

I didn’t slam up To 31 I think I brought it up to 24ppm amd it Was tough to hold it there. Your saying a target FC of 8-11?

I have the pump running 7-3. The salt is set At setting of 40 from 7-2 so that’s 7 hours

I’ll test it all when I get home. Cya 80 Ph 7.2 Alk 100 I’ll check salt w strips when I get home but the reading says 3100 for salt FC 1ppm I run it 8 hours per day

80

So I ended up slamming 14 gallons chlorine and thought passed Overnight test. Still didnt hold chlorine over time and went down to 1ppm. Ordered a new salt cell and installed. Added 2 gallons and ran pump for 2 days and water was crystal clear. Says the salt cell has power and is...

Passed all phases of slam this morning, held FC over night, no signs of algae present, crystal clear water, combined chlorine under .5. I’ll let it drift back down turn on swg and see if it can maintain appropriate FC level. If not time for a new cell.

Yes correct. 14 gallons of chlorine so far see how it holds over night tonight

OK thanks I’ll elevate the chlorine and do an overnight test

Cell volt 26.8 Amps is coming up as 5.69

What do you mean diagnostics? It seems to be holding at 1.5 ppm overnight.

28000 gallon, inground pool, I have the aqua rite T15 Salt chlorinator. I installed it in 2016 so this will be its 8th year. Says it’s generating chlorine but when I tested, I’m only getting one 1.5 ppm of chlorine. I run it seven hours a day at 50% setting. I’m wondering if it’s at the end...

So u think plumbing it in from the middle pipe underneath the l adapter as I highlighted would be ok?

Nothing it’s blocked off and roughed in

I have 28000 gallon IG pool with two jets. I have a 3rd plumbing pipe not in use. It Is designated for a robo vac should I have one hooked up to the pump but we don’t have one. Should I make this this into a 3rd jet? I was Wondering if it would help circulation when heating

I used the 5 ml vial so 1 drop is 1 ppm. Last night FC 28, this morning 28! Water crystal clear! However I can’t tell on the CC.? Because 1 drop is 1 ppm my CC level was one drop which is 1. I guess that’s the downfall of using 5ml vs 10ml because I can’t tell if that CC level is .5 or 1...

I ended up just measuring out 5ml

I will but but that will take another 2 days

May be a stupid question but the small comparator has a 1.8, 4.5, and a 9 ml. Large comparator has 10, 25, 44.