3rd jet?

[moreira85]

I have 28000 gallon IG pool with two jets. I have a 3rd plumbing pipe not in use. It
Is designated for a robo vac should I have one hooked up to the pump but we don’t have one. Should I make this this into a 3rd jet? I was
Wondering if it would help circulation when heating

 

[1poolman1]

I have 28000 gallon IG pool with two jets. I have a 3rd plumbing pipe not in use. It
Is designated for a robo vac should I have one hooked up to the pump but we don’t have one. Should I make this this into a 3rd jet? I was
Wondering if it would help circulation when heating

What is it plumbed to now?

 

[moreira85]

Nothing it’s blocked off and roughed in

 

[1poolman1]

It was installed so that you could plumb it as either a suction port for a suction-side (vacuum) cleaner or a pressure port for a pressure-side (after the filter) cleaner.
Never hurts to have more returns, especially with 1.5" plumbing.

 

[moreira85]

So u think plumbing it in from the middle pipe underneath the l adapter as I highlighted would be ok?

 

[1poolman1]

Connecting all three together would work, yes, if you're sure that is the pipe that goes to the pool fitting.