Recent content by isriam

i don't believe the issue to be the popup, as i'm getting no water through the line in the bottom of spa. is there a way to use like a fish tape to try and see if the line is actually connected?

I have a low profile 6 port A&A and my spa has 4 pop ups, but only 3 pop up. I've run the system for years (not original owner) and known this, but not sure how i could try and fix it. I've taken the popup out and tried to dig around in the hole to see if it was clogged but only some calcium...

Ah, replaced my light and now my second pool light is acting weird. White doesn't seem to work but red/green do. It was working with the other light broken so is it possible there is a relay/voltage issue or is the light just flaking out?

has anyone ever done this replacement? at 269.99 i could do all 3 of my lights for the price of 1 fixture from pentair. https://www.florida-sunseeker.com/products/pentair-619818z-kit-intellibrite-5g-pcba-pool-aftermarket

thanks for the update. Do you know if the -W (white) will affect it? LPL-F2C-120-100-P xg colorsplash 100' 120v LPL-F2CW-120-100-P xg colorsplash RGB + white 100' 120v edit: i'll leave this here in case someone needs to search it in the future but i went ahead and got another intellibrite...

thanks for the quick reply. yea i have intellitouch and since i'm dealing with a quick drain and repair on a wall figured i'd research my broken light. a quick look through your history brought me back here where i replied earlier lol. i have intellitouch with the screenlogic ip controller...

thanks! these are exactly the replies i was looking for. checking out the halco/j&j now! edit: read all this, only question is can i retain 2 intellbrite and 1 j&j? might have to dig further for that info.

its probably time to replace a pool light. an LED bought in 2012 seems to have failed and ive been dreading this day. i have 2 pool, 1 spa on different outlets but in sync via intellitouch controls. so i wanted to either a) replace all fixtures and go with a standard LED bulb, or buy a single...

love this, gonna follow it. i too run a home server (shout out /r/homelab) and have esxi with vm's running ubuntu and dockers. i run grafana and a full elk stack but my pool is controlled via pentair so i doubt i can grab these stats, since alexa doesnt even work anymore.

i have popups and i think the one in the middle of my spa is clogged. i'm not sure how to get it fixed, i pulled the popup and it had a lot of calcium so i cleaned it but its still not working and no water is coming out. any ideas?

thanks for the reminder, no its 520sq ft lol. that was from an old sig.

thanks! the pressure was it. cleaned out the filters and i'm back down to 1600. thats why i've been a member here for years :)

Has anyone successfully adjusted their swg flow switch to allow lower rpm? mine used to work at 1700, then 1900, now i'm at 2500 rpm just to keep the swg on. i cleaned it this weekend and while its still got a little build up, i'm wondering if its possible to adjust the flow switch by bending...

that just gave me a good idea. i wonder if you could insert a filter on your pool line to take some calcium out without having to install a softener? I'm in phoenix and have the exact same problem but I am not sure the easiest way to fix my water. you know, like the filters they put on...

Had the same issue with mine. Installed screen logic this weekend and haven't looked back.