C
Latest activity Postings Media About
-
-
CC0d3Sp4c3 reacted to ajw22's post in the thread Hayward Aqua Rite Power LED not turning ON with
Like.
Open up the Aquarite box, visually check the thermistor, and check the fuses with a multimeter. Post pics of what you find... -
CC0d3Sp4c3 replied to the thread AquaRite display board under-power issue.You might have the wrong references. Pin 2 is Negative and pin 4 is Positive 5Vdc. Hayward Aquarite SWG - Further Reading This might...
-
CC0d3Sp4c3 replied to the thread Featured Salt cell temp sensor error message.I hope this video will help others troubleshoot their Aquarite Salt cell temperature sensor. AQR Salt Cell Temperature Sensor bypass
-
CC0d3Sp4c3 replied to the thread Featured Salt cell temp sensor error message.It should work for Aquarite. Try it! I have this old AQR mainboard sw r1.55 with a hacked 10k resistor soldered on the PCB to spoof the...
-
-
CC0d3Sp4c3 replied to the thread Featured Salt cell temp sensor error message.On the Aquarite, you can isolate the thermister or disconnect the red or blue wire for testing. With the temp sensor disconnected, the...
-
CC0d3Sp4c3 replied to the thread Please Help Hayward T-15 and Aquarite panel showing salt levels 2000 ppm too high.I have to agree with JamesW, 2800 ppm is most likely incorrect. Get yourself a K-1766 Salt test kit. You need to understand that the...
-
CC0d3Sp4c3 replied to the thread What's the fix for this?.Move the switch to the OFF position. Push the diagnostic button 2x. What's the voltage reading on the display? Is the power led...
-
-
Loading…
-
Loading…
-
Loading…
