Latest activity Postings Media About
-
-
kellyfair replied to the thread FILTRATION SYSTEM.My pool configuration is like that too - factory installed cut outs and I really didn’t want to cut through my resin wall. So I have a... -
kellyfair replied to the thread FILTRATION SYSTEM.What size is your pump, and how many gallons is your pool? I’m not sure what you mean by it not reaching.
-
kellyfair replied to the thread AGP 18x33, question about uprights.There’s something wonky about your uprights, but I can’t tell what it is. For your concern about the bottom channel, you would need to...
-
kellyfair replied to the thread Wash out under side wall of the line of.I don’t see how you can repair a hole that size without taking pool down. In addition, there’s a darn good chance it will simply wash...
-
kellyfair replied to the thread Skimmer only or keep side drains in the system too?.It’s totally up to you. I put a valve on one of mine and then partially closed the valve. I liked that because I was doing a lot of...
-
kellyfair replied to the thread I am not crying yet.If you want to stick with Intex combo cartridge filter, you could go for the 1,500 model. Pretty sure it uses same size hoses.
-
kellyfair replied to the thread I am not crying yet.On the contrary, Intex pumps are supremely undersized for the pools they come with. So if the hat doesn’t help, a better pump might be a...
-
kellyfair replied to the thread I am not crying yet.Actually, I’m the one who initially said “cut in.” OP just said installed, so now I’m wondering which type of skimmer they have.
-
kellyfair replied to the thread Back to SWG?.So, moisture causes rust. If you take the extra steps you’ve mentioned and most importantly, insure that moisture doesn’t get trapped...
-
kellyfair replied to the thread AGP 18x33, question about uprights.What type pool is this? Manufacturer and model, please. Would like to have a look at the install instructions. I’m confused by the...
-
kellyfair replied to the thread I am not crying yet.Yes, photos to see your set-up. Did your pool come with 1 or 2 intakes? If 2, and you also cut in a skimmer, I would plug one of the...
-
I would go with foam rubber if possible. I would think that insulation boards would compress to very firm / solid feel. I used a bunch...
-
kellyfair replied to the thread To drain or treat.I agree with Jim, but I have to say it is very satisfying watching the transformation if you do decide to treat!
-
kellyfair reacted to Newdude's post in the thread More questions regarding semi inground pool soon to be installed with
Haha.
Who are we to tell the universe that we know better ? It was meant to be. (y) -
kellyfair replied to the thread New AGP with Powerline XP I double insulated pump - is bonding required?.But your pool itself needs to be bonded, correct? Regardless of whether or not your pump is exempt.
-
-
Loading…
-
Loading…
-
Loading…