| Line 7: | Line 7: | ||
The Chemistry Sensing Module is a separate system for PH and ORP monitoring and some people fell is a waste of money.<ref> https://www.troublefreepool.com/threads/hayward-aqua-plus-check-system-light-on.191535/post-1688455</ref> | The Chemistry Sensing Module is a separate system for PH and ORP monitoring and some people fell is a waste of money.<ref> https://www.troublefreepool.com/threads/hayward-aqua-plus-check-system-light-on.191535/post-1688455</ref> | ||
| + | |||
| + | ==Spa Spillover== | ||
| + | You can enable the Spa Spillover in the Configuration Menu. | ||
| + | |||
| + | To schedule the spa spillover to run automatically you use a group function assigned to an aux button. But you can only assign one time period to each button.<ref> https://www.troublefreepool.com/threads/spillover-question.195423/post-1722887</ref> | ||
| + | |||
| + | However if you have two extra buttons available, you can assign different time periods to each while having the same functions. | ||
==CMS comm error== | ==CMS comm error== | ||
| − | + | The CSM (Chemistry Sensing Module) comm error appears when Sense & Dispense is enabled, but the Chemistry Sensing Module is not found.<ref> https://www.troublefreepool.com/threads/hayward-goldline-aqua-plus.194999/post-1718637</ref> | |
If yes, verify that it's plugged in. | If yes, verify that it's plugged in. | ||
If no, disable Sensing System in the Configuration Menu.<ref> https://www.troublefreepool.com/threads/hayward-aqua-plus-check-system-light-on.191535/</ref> | If no, disable Sensing System in the Configuration Menu.<ref> https://www.troublefreepool.com/threads/hayward-aqua-plus-check-system-light-on.191535/</ref> | ||
Revision as of 13:29, 22 October 2019
Hayward ProLogic
Goldline introduced AquaLogic in 2003. Hayward acquired Goldline in August of 2004. Hayward discontinued AquaLogic in 2008 and replaced it with Prologic.
ProLogic uses the GLX-PCB-PRO board.
The Chemistry Sensing Module is a separate system for PH and ORP monitoring and some people fell is a waste of money.[1]
Spa Spillover
You can enable the Spa Spillover in the Configuration Menu.
To schedule the spa spillover to run automatically you use a group function assigned to an aux button. But you can only assign one time period to each button.[2]
However if you have two extra buttons available, you can assign different time periods to each while having the same functions.
CMS comm error
The CSM (Chemistry Sensing Module) comm error appears when Sense & Dispense is enabled, but the Chemistry Sensing Module is not found.[3]
If yes, verify that it's plugged in.
If no, disable Sensing System in the Configuration Menu.[4]
- ↑ https://www.troublefreepool.com/threads/hayward-aqua-plus-check-system-light-on.191535/post-1688455
- ↑ https://www.troublefreepool.com/threads/spillover-question.195423/post-1722887
- ↑ https://www.troublefreepool.com/threads/hayward-goldline-aqua-plus.194999/post-1718637
- ↑ https://www.troublefreepool.com/threads/hayward-aqua-plus-check-system-light-on.191535/
