Hayward OmniPL
Hayward OmniPL was introduced in November 2020[1] as a mid-range automation solution for pools that did not need all the capabilities of the Hayward OmniLogic system.
OmniPL has the following features:
- external touchscreen display and a 15-foot cord
- four built-in high voltage relays that can be easily upgraded to six or eight
- control of up to eight variable-speed pumps using RS-485 communications without a relay
- control up to 4 automatic valve actuators
- 5 external inputs; 3 for temperature sensing, 2 for external input devices
- integrated TurboCell S3 SWG controls
- control an optional Hayward Aqua Rite salt chlorinator for a second SWG cell for large pools
- input for ORP and pH sensing (HL-CHEM)
- connection for a flow switch (GLX-FLO) to detect water flow
- OmniDirect Mode which controls ColorLogic LED lighting
- built-in wireless and Ethernet port
- OmniLogic app control
- 100amp service subpanel with 8 circuit breaker capacity
OmniPL Retrofit Kit
The OmniPL Retrofit Kit[2] will change an ProLogic, AquaLogic, eCommand or AquaPlus system to OmniPL. The Retrofit Kit Installation Manual discusses some accessories that are not compatible with the OmniPL.
The OnmiPL Retrofit Kit only contains:
- OmniPL mainboard
- Touch screen controller with cord
- 4 conductor transformer secondary cable
- 2 conductor transformer primary cable
- 2 conductor power input cable
Hayward eCommand to OmniPL Retrofit
A member did this YouTube Video upgrading from a Hayward ECOMMAND 4 to OmniPL.[3]
- ↑ https://www.globenewswire.com/news-release/2020/11/18/2129240/0/en/Hayward-Enhances-OmniPL-Automation-Offerings-Providing-Optimized-Solutions-for-Even-More-Pools-and-Spas.html
- ↑ https://hayward.com/omnipltm-retrofit-kit.html
- ↑ https://www.troublefreepool.com/threads/omni-pl-upgrade-kit-hayward-automation.245707/post-2445063
