Hayward Automation Systems
Hayward does not make it easy to understand the various automation systems Hayward sells and has sold.
Technical Updates for Pool Professionals shows all the pump models that work with Omni-Based systems.
Hayward OmniLogic
OmniLogic (Control): Automation system that has breakers in the unit. Most high/low voltage capability. Top system in their automation tiers. Controls 4 bodies of water (pool, spa, etc.), 16 variable pumps, 4 and expandable up to 8 actuators, up to 5 heaters, includes 4 and expandable to 10 high voltage relays (lights, booster pump, etc.), 4 expandable to 8 low voltage relays, comes ready for salt chlorination, 12 breakers in panel, need to add wifi.
Hayward OmniPL
OmniPL (Control): Automation system that has breakers in the unit. Has fewer high voltage and low voltage relays than OmniLogic Automation Panel (hardware) and more than Omnihub (Control). Middle system in their automation tiers. Controls 3 bodies of water (pool, spa, etc.), 8 variable pumps, 4 actuators, 2 heater + 1 solar, 8 high voltage relays (lights, booster pump, etc.), 2 low voltage relay, comes ready for salt chlorination, 8 breakers in panel, built in wifi.
Hayward OmniHub
Omnihub (Control): The product you can use to retrofit automation into an existing system. No breakers in unit. If you want to add this to an S3 system after the fact, this is the model number: AQRS3OMNIKIT. Lowest system in the automation tiers. Controls 4 bodies of water (pool, spa, etc.), 3 variable pumps, 2 actuators, 1 heater + 1 solar, 3 high voltage relays (lights, booster pump, etc.), 1 low voltage relay, can add AquaRite for chlorination, built in wifi.
AquaRite S3 Omni: Salt system + Omnihub Automation. Uses OmniLogic app.
OmniLogic App
OmniLogic App: App used to control everything remotely. Software. Not to be confused with OmniLogic Hardware. The app can be used across multiple hardware products.
Hayward Prologic
The ProLogic automation uses an AquaConnect software.
