RayPak Heaters - Further Reading

This article is currently incomplete. While this article is off to a good start, it still has room for major improvement. Until the article reaches its full potential, it will be hidden from search results.

Raypak Heaters

Heater Hits Max Temperature before Actual Temperature

When automation is controlling the heater the automation temperature and the Raypak heater temperature can be different and the heater can hit its maximum temperature while the water is not yet to that temperature.

The default maximum temperature for the pool and spa can be raised.

See page 28 of the Raypak INSTALLATION AND OPERATION MANUAL

Spa Max Temp – Spa Setpoint Maximum Adjustment

Refer to step one on page 28 to access the program screen. Press the MODE button until SPA MAX TEMP appears on the digital display. Using the UP and DOWN buttons will change the Maximum Temperature Setting to your desired value. The control can be set for a maximum of 107°F (42°C).

Pool Max Temp – Pool Setpoint Maximum Adjustment

Refer to step one on page 28 to access into the program screen. Press the MODE button until POOL MAX TEMP appears on the digital display. Using the UP and DOWN buttons will change the Maximum Temperature Setting to your desired value. The control can be set for a maximum of 107°F (42°C).