RayPak Heaters
Heaters Hits Max Temperature before Actual Temperature
When automation is controlling the heater the automation temperature and the Raypak heater temperature can be different and the heater can hit its maximum temperature while the water is not yet to that temperature.
The default maximum temperature for the pool and spa can be raised.
Page 28 of the manual --> http://cdn.globalimageserver.com/FetchDocument.aspx?ID=c404f1c5-ac50-4209-9457-56246d010b20
Spa Max Temp – Spa Setpoint Maximum Adjustment Refer to step one above to access the program screen. Press the MODE button until SPA MAX TEMP appears on the digital display. Using the UP and DOWN buttons will change the Maximum Temperature Setting to your desired value. The control can be set for a maximum of 107°F (42°C).
Pool Max Temp – Pool Setpoint Maximum Adjustment Refer to step one above access into the program screen. Press the MODE button until POOL MAX TEMP appears on the digital display. Using the UP and DOWN buttons will change the Maximum Temperature Setting to your desired value. The control can be set for a maximum of 107°F (42°C).
