m (Added Stub) |
|||
| Line 5: | Line 5: | ||
AquaPure cells connect with PureLink power center and AquaLink automation controllers. | AquaPure cells connect with PureLink power center and AquaLink automation controllers. | ||
| + | |||
| + | ==AquaPure Resets to 35% Everytime it is Powered On== | ||
| + | |||
| + | A member had the problem of his Aquapure resetting to 35% every time it was powered on by the timer.<ref>https://www.troublefreepool.com/threads/aquapure-keeps-resetting-to-chlorine-rate-35-from-pool-pump-timer.197670/post-1743853</ref> After discussions with a Jandy representative it was determined the problem was a bad board. | ||
==Power Center Transformer== | ==Power Center Transformer== | ||
Revision as of 04:31, 7 February 2020
Jandy AquaPure SWG
AquaPure salt-water chlorine sanitizing systems use salt water to deliver water sanitation.
AquaPure cells connect with PureLink power center and AquaLink automation controllers.
AquaPure Resets to 35% Everytime it is Powered On
A member had the problem of his Aquapure resetting to 35% every time it was powered on by the timer.[1] After discussions with a Jandy representative it was determined the problem was a bad board.
Power Center Transformer
Older Power Centers use a rectangle transformer P/N T1005 that is no longer available. Currently, Jandy has part R0481400 which is the round transformer.
A member found that the new part fit perfectly with the same mounting holes. Even the High Voltage side wires were color coded identically. The only difference is the new part has a ground wire that was attached to the common ground.[2]
Jandy T1005
Jandy R0481400
Jandy T1005
Jandy T1005 Burnt Plug
