Line 10: | Line 10: | ||
It has been reported that many Ace Hardware Stores carry start capacitors if you need something right now.<ref>https://www.troublefreepool.com/threads/bad-capacitor.190116/#post-1694317</ref> | It has been reported that many Ace Hardware Stores carry start capacitors if you need something right now.<ref>https://www.troublefreepool.com/threads/bad-capacitor.190116/#post-1694317</ref> | ||
+ | |||
+ | [http://www.inyopools.com/HowToPage/how-to-select-the-right-capacitor-for-your-pool-pump-motor.aspx?CommentPage=1 How To Select the Right Capacitor For Your Pool Pump Motor] |
Revision as of 02:51, 16 August 2019
A common reason for pumps not starting is failure of the start capacitor. There can be two types of capacitors in a pump - a start capacitor and/or a run capacitor.
Not all motors have run capacitors. The newer VS pumps do not have a start capacitor either.
The start capacitor is often under the small bump at the top of the motor. Or it can be inside the motor.
Some capacitors have a bleed resistor connecting the two prongs. If your capacitor has a bleed resistor it should be moved to the new capacitor.[1]
Be careful when handling a capacitor. It can hold a voltage charge for a long time and you can be shocked by it.
It has been reported that many Ace Hardware Stores carry start capacitors if you need something right now.[2]