Which Pentair Clean & Clear Plus filter do I have?

[fabsroman]

Hello everybody. Hope everybody is doing well under our current circumstances.

I am new to the pool scene and new to the forum too. My wife and I bought a 19 year old house with a pool.

This site was recommended to me by at least 5 people on another site completely unrelated to this subject.

Right now, my wife and I are trying to figure out how to open our pool. Looking at replacing the current pump and we need to buy the guts (e.g., cartridges, manifolds, air tube) for the Pentair Clean & Clear Plus filter that is already in place. Problem is, we don't know if it is a 320, 420, or 520. I measured the height of the filter canister. It is 42" to the top of the dome and 49" to the top of the gauge. Guessing the filter is as old as the house, but that is a complete guess.

Any and all help is greatly appreciated.

 

[Jimrahbe]

F,

The measurement from the ground to the top of the gauge for the CCP 420 is 49"..

See page 12 of this manual.... https://www.pentair.com/content/dam...lean_and_Clear_Plus_Owners_Manual_English.pdf

Thanks,

Jim R.

 

[fabsroman]

F,

The measurement from the ground to the top of the gauge for the CCP 420 is 49"..

See page 12 of this manual.... https://www.pentair.com/content/dam...lean_and_Clear_Plus_Owners_Manual_English.pdf

Thanks,

Jim R.

Thank you very much for that. I have no idea why I didn't look for the online manual myself, especially since it will really come in handy since we have decided to continue using this filter. Looks like it is a CCP420 that we have.

 

[JamesW]

There should be a sticker with a barcode, the filter part number P/N, and the date of manufacture.

P/N..............Filter
160310.......CCP240
160340.......CCP320
160301.......CCP420
160332.......CCP520

 

[PoolGate]

Welcome aboard!

 

[fabsroman]

Welcome aboard!

Thanks for the welcome, thanks for coming over this weekend, thanks for helping me understand things, thanks for helping me open the pool, and thanks for the starter TF-100 test kit. Just thanks a lot. I would probably still be spinning my wheels and trying to figure all of this out if it wasn't for your help.