Upgrading pump motor - poolwarehouse or inyopools?

zolakk

0
Bronze Supporter
Jul 29, 2011
90
Las Vegas, NV
Pool Size
10000
Surface
Plaster
Chlorine
Liquid Chlorine
Hi all,
I'm finally looking to upgrade my pump motor from single speed now that it's the cold season and it looks like I can get the same motor, impeller and seals from poolwarehouse for about $80 cheaper than inyo - $669 vs $752 both with shipping, tax, etc. I know inyo comes highly regarded but I can't seem to find too much here on poolwarehouse that's current, does anyone have any experience with them? It's a pretty big difference on a pretty big purchase so I want to make sure it's worth it or not before pulling the trigger. For the record, here's what I'm looking at in case there's somewhere else I didn't consider:
V-Green EVO EVQ225
SPX3215C impeller
GOKIT80 seal kit since I'll have it all apart, seems wise to do. I know the inyo one has lube too but already have so don't need

Thanks
 
Hi all,
I'm finally looking to upgrade my pump motor from single speed now that it's the cold season and it looks like I can get the same motor, impeller and seals from poolwarehouse for about $80 cheaper than inyo - $669 vs $752 both with shipping, tax, etc. I know inyo comes highly regarded but I can't seem to find too much here on poolwarehouse that's current, does anyone have any experience with them? It's a pretty big difference on a pretty big purchase so I want to make sure it's worth it or not before pulling the trigger. For the record, here's what I'm looking at in case there's somewhere else I didn't consider:
V-Green EVO EVQ225
SPX3215C impeller
GOKIT80 seal kit since I'll have it all apart, seems wise to do. I know the inyo one has lube too but already have so don't need

Thanks
NO LUBE on the seal other than a very slight amount on the rubber cup to help it seat in the sealplate and maybe a bit on the rubber ring in the part that goes onto the shaft.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.