Updating Pump Motor Breaker to 2020 NEC

[FLOMOPOOL]

Just wanted to check in with you all on this - thanks so much for your help !

Is updating my pump motor to the 2020 NEC really as easy as simply pulling out the current Siemens QP 2-pole 20A breaker in my sub-panel by the pool and inserting a new Siemens QPF GFCI 2-pole 20A breaker ?

Thanks again.

 

[ajw22]

Is updating my pump motor to the 2020 NEC really as easy as simply pulling out the current Siemens QP 2-pole 20A breaker in my sub-panel by the pool and inserting a new Siemens QPF GFCI 2-pole 20A breaker ?

And attaching the breaker neutral wire pigtail to the neutral bar in the panel.

This is all assuming the circuit is wired properly.

 

[FLOMOPOOL]

And attaching the breaker neutral wire pigtail to the neutral bar in the panel.

This is all assuming the circuit is wired properly.

Yes - my motor is wired for 230V, so a hot to each line screw on the new GFCI breaker and the neutral pigtail on it to the neutral bar in the sub-panel.