I opened my pool over a week ago and the water has been clear since that day, however, I haven't been able to keep the chlorine level up (based on the basic Taylor OTO kit and store-bought test strips). I ordered the TF-100 kit and have been adding liquid chlorine (12.5%) daily to keep chlorine in the pool until the kit arrived. The kit arrived today and my test results are below.
TF-100 RESULTS
FC: 1
CC: 2.5
TC: 3.5
CH: 450
TA: 240
CYA: 50
pH: 7.8
I will perform the OCLT tonight with the expectation that I will lose more than 1.0 ppm FC. If so, I'll start the SLAM process.
My questions at this point are:
Is there an article or post with the SLAM steps outlined (assuming my OCLT results show I need to SLAM)?
Are there any other numbers in my TF-100 test results that stand out and should be addressed?
Thanks in advance for any help.
TF-100 RESULTS
FC: 1
CC: 2.5
TC: 3.5
CH: 450
TA: 240
CYA: 50
pH: 7.8
I will perform the OCLT tonight with the expectation that I will lose more than 1.0 ppm FC. If so, I'll start the SLAM process.
My questions at this point are:
Is there an article or post with the SLAM steps outlined (assuming my OCLT results show I need to SLAM)?
Are there any other numbers in my TF-100 test results that stand out and should be addressed?
Thanks in advance for any help.