Hi all, I’ve installed a hydra pools 20x40 lagoon with a tanning ledge. The stairs have a groove made into each section on the back of each tread and the bottom around the wall of the tanning ledge for the bead made to the liner to secure into to hold in place. How in the world do you get that liner bead to push down into that groove? They sent some plastic tools to push with but it’s not very productive. Any tricks I’m missing here? Thanks for any help!
Tanning ledge liner track help
- Thread starter Speedracer2284
- Start date
hi there Speedracer.... welcome to Trouble Free Pools :hand:
I know just the person who would know the answer here- Yooohooo! @jimmythegreek He *knows* vinyl pools.
Maddie
I know just the person who would know the answer here- Yooohooo! @jimmythegreek He *knows* vinyl pools.
Maddie
On that section you work from the bottom up setting the beads. If you hang liner first it's very hard to set it. I have a plastic spatula that we've rounded the front and once you get it started you just slide down with some pressure and it goes in. Work sideways from an edge mot in the middle