Have Hayward Aqua-Rite 15. When checking diagnostic readings, this is what was displayed: before pushing the diagnostic button: the Average Salt Level reads 3.10. Upon pushing the diagnostic button to check each reading, the following is displayed: 1) No water temp is displayed; only the figure "29" appears; 2) Voltage reads 25.5; 3) Amperage reads 7.46 sometimes and 0.00 at other times; 4) Desired output reads 60p, which is what I set it at; 5)Instant Salt reads 0.00; 6) reads AL-0; 7) reads r1.59; 8) Cell size reads t-15. Would all this indicate a faulty cell? A new cell was installed about a year ago; no problems until now. SWG is on a timer and does not operate until after pump is already running. SWG set to operate 2 hours a day.
Am at a complete loss. Any help most welcome.
Am at a complete loss. Any help most welcome.
