Solar Heater Vacuum Breaker Valve Leak

[krsnaday]

Dear TFP Gurus

So the pool we inherited also has a vacuum breaker valve leak.
Can someone please ID the model of the valve that I need to replace this with. It might be a LASCO valve but I couldn't really make it out very clearly.

The size seems to be 2 x 3/4" (it says so on the valve) which doesn't make a whole lot of sense to me ...

Thanks.

 

[basod]

Likely made by Watts based on the "W"
The Lasco stamp is the manufacturer of the Tee fitting the 2"x3/4" is the reducer bushing installed in the tee.
hard to tell if there is a 3/4"X1/2" reducer but here is a 1/2" version of that valve
http://www.supplyhouse.com/Watts-05...PVNJa_SZ29jdo0TxRyxx7xuMVsZ9FVu86gaAu0r8P8HAQ

 

[krsnaday]

Thank you so much!!!

 

[krsnaday]

Google

I assume this would be a drop-in replacement.

 

[basod]

The 3/4" version looks correct- again I can't tell from the picture posted if there is an additional 1/2" x 3/4" reducer bushing. You could add the bushing for ~$1 and save some money on a 1/2" valve vs 3/4"

 

[krsnaday]

Cool. I'll try to change it out and post back here with results. Thanks again.