Hello to the wonderful people of this forum! I posted here last week about my super low chlorine, high pH, low CYA, etc levels last week and got super helpful advice. I just moved into a new house that has a salt water pool, and this is my first ever attempt at caring for a pool. I was recommended to shock the pool, which I did. Now just trying to get an idea of my next steps to getting this pool to safe swimming levels.
I retested and now here are my numbers:
Chlorine: 5ppm
pH: 8.2+
Free Chlorine: 10 ppm
Combined chlorine: 1 ppm
Total chlorine: 11 ppm
Calcium Hardness: 450 ppm
Total Alkalinity: 110
CYA: 20ppm (may be lower)
Salt test: 4000 ppm
Chlorine seems to be a little high now, but I'm just glad it's no longer super low. I have a 10 lb bag of dry CYA and will use pool math to figure out how much to put in to increase CYA levels. However, I was told I shouldn't just dump it in at the risk of damaging the surfaces of the pool. Should I mix it with some warm water and then dump it in?
I am also in the process of getting muriatic acid in order to lower the pool's pH, so that's in the works next as well.
Is there anything else I should do next? Do I buy salt for the salt water pool? Not sure how that works. Also, how often should my filter be running? It seems to be set to run constantly right now. I'm in PA and have a 19500 gallon salt water pool. I've read it should only run 8-10 hrs? And should I set it for day or night time? Out of curiosity, should I keep it running in the winter to prevent pipes from freezing?
Thanks again so much!!!
I retested and now here are my numbers:
Chlorine: 5ppm
pH: 8.2+
Free Chlorine: 10 ppm
Combined chlorine: 1 ppm
Total chlorine: 11 ppm
Calcium Hardness: 450 ppm
Total Alkalinity: 110
CYA: 20ppm (may be lower)
Salt test: 4000 ppm
Chlorine seems to be a little high now, but I'm just glad it's no longer super low. I have a 10 lb bag of dry CYA and will use pool math to figure out how much to put in to increase CYA levels. However, I was told I shouldn't just dump it in at the risk of damaging the surfaces of the pool. Should I mix it with some warm water and then dump it in?
I am also in the process of getting muriatic acid in order to lower the pool's pH, so that's in the works next as well.
Is there anything else I should do next? Do I buy salt for the salt water pool? Not sure how that works. Also, how often should my filter be running? It seems to be set to run constantly right now. I'm in PA and have a 19500 gallon salt water pool. I've read it should only run 8-10 hrs? And should I set it for day or night time? Out of curiosity, should I keep it running in the winter to prevent pipes from freezing?
Thanks again so much!!!